This article mainly introduces:

Algeria hydraulic cylinder,forklift tilting cylinder manufacturer,forklift tilting cylinder

(Algeria forklift tilting cylinder,produced by Hengyu Hydraulic Co., Ltd）

forklift tilting cylinder are widely used in Algeria，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed forklift tilting cylinder for customers from Algeria.

Introduction to forklift tilting cylinder:

forklift tilting cylinder piston rod material introduction: In general, we use 45 steel to produce forklift tilting cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

forklift tilting cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards forklift tilting cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the forklift tilting cylinder guide is determined by the length of the stroke. Check the strength of forklift tilting cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

When producing oil forklift tilting cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

forklift tilting cylinder head explanation: low pressure castings, medium and low pressure with HT300 gray iron, medium and high pressure with 35, 45 steel. When the forklift tilting cylinder head itself is the guide sleeve of the piston rod, the forklift tilting cylinder head is best cast iron. At the same time, brass, bronze or other wear-resistant materials should be fused on the guide surface. If the guide sleeve is pressed into the forklift tilting cylinder head, the guide sleeve shall be wear-resistant cast iron, bronze or brass.

Answers to some questions about forklift tilting cylinder:

How to take out the diaphragm of hydraulic cylinder? The septum ring is also known as the septum sleeve, when the cylinder is too long, and does not need too much travel, add the septum sleeve, limit the stroke of the hydraulic cylinder, set on the piston rod, only contact with the guide sleeve and piston, do not cooperate with the cylinder, limit the stroke, take out the difficulty is different, need to have such a professional tool, before taking out to consult the manufacturer.

How to exhaust hydraulic cylinder?
Exhaust: The hydraulic system generally does not have exhaust, the use of the tank can exhaust, the oil operation will bring the gas back to the tank, and the tank can be communicated with the atmosphere. The gas will escape from the oil.