This article mainly introduces:

Azerbaijan hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

(Azerbaijan stroke adjustable cylinder,produced by Hengyu Hydraulic Co., Ltd）

stroke adjustable cylinder are widely used in Azerbaijan，because of no need for deceleration device，long service life，smooth movement.So our company has designed stroke adjustable cylinder for customers from Azerbaijan.

Introduction to stroke adjustable cylinder:

After the stroke adjustable cylinder is installed, lubricating grease should be added to the relative moving parts such as earring and middle hinge shaft before trial operation.

If it is found that the stroke adjustable cylinder lubrication is poor or the stroke adjustable cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the stroke adjustable cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the stroke adjustable cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the stroke adjustable cylinder center line. In this way, when the piston works in the stroke adjustable cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the stroke adjustable cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

When the stroke adjustable cylinder is repaired, its inner and outer diameter and roundness should be accurately measured. If the inner hole of the stroke adjustable cylinder is badly worn, it can be repaired by grinding the mandrel or honing on the boring machine. If the piston is worn, it can be repaired by electroplating, and serious wear should be replaced.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular stroke adjustable cylinder action. Troubleshooting method: Replace the rubber hose.

Answers to some questions about stroke adjustable cylinder:

How does the variable amplitude cylinder work?
The variable amplitude cylinder is generally an engineering hydraulic cylinder connected by the front and back earrings, and the telescopic expansion of the hydraulic cylinder changes the Angle of the arm of the lifting machinery to achieve the role of the variable amplitude, according to the role it plays is called the variable amplitude cylinder, and there is no variable amplitude hydraulic cylinder in the classification of hydraulic cylinders.

What is the material of the hydraulic cylinder slider?
Three parts of the hydraulic cylinder are essential, which are: cylinder - cylinder head assembly, piston - piston rod assembly, and sealing device. When you say slider, you mean piston. - Piston rod. Piston materials commonly used gray cast iron, wear-resistant cast iron, aluminum alloy (assembled), etc., can also be used 35 and 45 steel (integral). The piston rod is generally made of 35 and 45 steel. When the impact vibration is large, alloy steel such as 55 steel or 40Cr is used.