This article mainly introduces:

India hydraulic cylinder,synchronous hydraulic cylinder manufacturer,synchronous hydraulic cylinder

(India synchronous hydraulic cylinder,produced by Hebei Hengyu company）

synchronous hydraulic cylinder are widely used in India，because of excellent temperature resistance，powerful torque，no transmission clearance.So our company has designed synchronous hydraulic cylinder for customers from India.

Introduction to synchronous hydraulic cylinder:

Before purchasing the synchronous hydraulic cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

The main role of the synchronous hydraulic cylinder: the synchronous hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the synchronous hydraulic cylinder realizes reciprocating motion. The structure of the synchronous hydraulic cylinder has three categories: piston synchronous hydraulic cylinder, plunger synchronous hydraulic cylinder, swing synchronous hydraulic cylinder, piston synchronous hydraulic cylinder and plunger synchronous hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing synchronous hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the synchronous hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The synchronous hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

When the synchronous hydraulic cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the synchronous hydraulic cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil synchronous hydraulic cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical synchronous hydraulic cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the synchronous hydraulic cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

The synchronous hydraulic cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

Answers to some questions about synchronous hydraulic cylinder:

What is the difference between single acting hydraulic cylinder and double acting hydraulic cylinder?
Single action hydraulic cylinder is a single direction force work, the return of the plunger depends on itself or the weight of the mechanism to return. The double acting hydraulic cylinder is mainly different from the extension and retraction of the piston (the thrust and tension of the saying), which are all operated by the action of liquid pressure.

What valve is used to control the speed of the cylinder?
Hydraulic cylinder for lifting is generally the piston rod downward installation, to achieve the fast and slow speed of the cylinder, you can add a two-digit three-way electromagnetic reversing valve + a throttle valve on a branch at the bottom of the cylinder, you can achieve speed change, control mode can be controlled by time control can also be controlled by stroke switch. If you want to achieve more accurate control can use proportional valve control.