This article mainly introduces:

Belgium hydraulic cylinder,sanitation truck hydraulic cylinder manufacturer,sanitation truck hydraulic cylinder

(Belgium sanitation truck hydraulic cylinder,produced by Hengyu Group）

sanitation truck hydraulic cylinder are widely used in Belgium，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed sanitation truck hydraulic cylinder for customers from Belgium.

Introduction to sanitation truck hydraulic cylinder:

Before purchasing the sanitation truck hydraulic cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

The material, shape and compression of the sanitation truck hydraulic cylinder seal have a great impact on the service life and work efficiency of the sanitation truck hydraulic cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.

The difference between the integral sanitation truck hydraulic cylinder and the split sanitation truck hydraulic cylinder: The integral sanitation truck hydraulic cylinder and the split sanitation truck hydraulic cylinder in the sanitation truck hydraulic cylinder are two different sanitation truck hydraulic cylinders, and they are very different. The whole sanitation truck hydraulic cylinder, which is cast in one body, is not prone to problems such as oil leakage; The split sanitation truck hydraulic cylinder is welded twice, so if it is not handled well at the welding, it is prone to problems such as oil leakage and sanitation truck hydraulic cylinder damage. Therefore, it is obvious that the answer to this question is for difference.

The sanitation truck hydraulic cylinder is not the same as the sanitation truck hydraulic cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the sanitation truck hydraulic cylinder can not be used as a high-power power component, but the sanitation truck hydraulic cylinder can be used as a relatively large power component, or the sanitation truck hydraulic cylinder system can be used.

Answers to some questions about sanitation truck hydraulic cylinder:

A hydraulic system functions three cylinders to maintain pressure, what components need to be used?
Two way cartridge valve can be selected for control. Two way cartridge valve advantages: 1) flow capacity is large, especially suitable for large flow occasions. 2) The spool has sensitive action and strong anti-clogging ability. 3) Good sealing, small leakage, oil flow through the valve pressure loss is small. 4) Simple structure, easy to standardize.

Structural characteristics of the plunger cylinder? (1) The plunger hydraulic cylinder is a single-acting hydraulic cylinder, which can only move in one direction by hydraulic pressure, and the return trip of the plunger depends on other external forces or the weight of the plunger; (2) The plunger is only supported by the cylinder liner and is not in contact with the cylinder liner, so the cylinder liner is easy to process, so it is suitable for long stroke hydraulic cylinder; (3) the total pressure of the plunger during work, so it must have sufficient stiffness; (4) The weight of the plunger is often large, and it is easy to sag due to its own weight when placed horizontally, resulting in wear of the seals and guide side, so its vertical use is more favorable.