This article mainly introduces:

S.Africa hydraulic cylinder,100 ton hydraulic cylinder manufacturer,100 ton hydraulic cylinder

(S.Africa 100 ton hydraulic cylinder,produced by Hebei Hengyu company）

100 ton hydraulic cylinder are widely used in S.Africa，because of powerful torque，clever hydraulic energy conversion，high work efficiency.So our company has designed 100 ton hydraulic cylinder for customers from S.Africa.

Introduction to 100 ton hydraulic cylinder:

How the cavitation of the 100 ton hydraulic cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the 100 ton hydraulic cylinder, resulting in corrosive damage to the parts.

Piston 100 ton hydraulic cylinder is widely used in hydraulic transmission. When the 100 ton hydraulic cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the 100 ton hydraulic cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the 100 ton hydraulic cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

The difference between the plunger 100 ton hydraulic cylinder and the piston 100 ton hydraulic cylinder is that the piston in the 100 ton hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type 100 ton hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

When the 100 ton hydraulic cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the 100 ton hydraulic cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Answers to some questions about 100 ton hydraulic cylinder:

In hydraulic equipment, is the motor power related to the cylinder pressure holding time?
Irrelevant. The motor only drives the plunger in the hydraulic cylinder of the oil pump to extend out, and stops when the set pressure is reached; The length of the pressure holding time is related to the sealing degree of the hydraulic cylinder and the solenoid valve.

How to calculate the tonnage of hydraulic cylinder? The tonnage of the cylinder refers to the output force of the cylinder under rated working pressure: 1, for single rod piston hydraulic cylinder, it can be calculated by the area of the circle corresponding to the inner diameter of the cylinder A (square centimeter), and the rated working pressure of the system p (mpa), the value is equal to 10pA kg force, and the ton is 0.01pA. 2, for the double rod piston hydraulic cylinder, with A(square centimeter) to indicate the cylinder cylinder diameter and piston rod outer diameter defined by the ring area, with p (mpa) to indicate the rated working pressure of the system, the output force of the cylinder is 0.01pA ton force.