This article mainly introduces:

Malaysia hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

(Malaysia steering power cylinder,produced by Hengyu Hydraulic Co., Ltd）

steering power cylinder are widely used in Malaysia，because of no need for deceleration device，high work efficiency，excellent fatigue and impact resistance.So our company has designed steering power cylinder for customers from Malaysia.

Introduction to steering power cylinder:

When the piston speed of the steering power cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the steering power cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.

In order to ensure the service life of the steering power cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the steering power cylinder, causing damage to the seal and causing leakage in the steering power cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

The main role of the steering power cylinder: the steering power cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the steering power cylinder realizes reciprocating motion. The structure of the steering power cylinder has three categories: piston steering power cylinder, plunger steering power cylinder, swing steering power cylinder, piston steering power cylinder and plunger steering power cylinder to achieve reciprocating linear motion, output speed and thrust, swing steering power cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the steering power cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The steering power cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

In recent years, the processing process of the steering power cylinder generally adopts the rolling method, which is a pressure finishing processing, which uses the cold plastic characteristics of the metal at room temperature, and uses the rolling tool to exert a certain pressure on the surface of the workpiece, so that the surface metal of the workpiece produces plastic flow, and fills in the low concave trough of the original residue, and the roughness value of the workpiece surface is reduced. Due to the plastic deformation of the rolled surface metal, the surface tissue is cold hardened and the grain is fine, forming a dense fiber, and forming a residual stress layer, and the hardness and strength are increased, thus improving the wear resistance, corrosion resistance and compatibility of the workpiece surface. Rolling is a plastic machining method without cutting.

Answers to some questions about steering power cylinder:

How many tons is the oil cylinder 16mpa?
It depends on the cross-sectional area of the cylinder A(mm2)F=16mpa×A unit is (tons).

What does the maximum output force of the cylinder piston mean?
The maximum output of the cylinder is related to the pressure of the hydraulic system that you link to the cylinder. For example, the rated maximum output thrust of the MOB 50 cylinder is 1.3 tons and the rated pressure is 7Mpa. That is, when the input hydraulic oil pressure of the cylinder reaches 7Mpa, the maximum output thrust of the cylinder is only 0.98 tons. When the input hydraulic pressure is only 5Mpa, the maximum output thrust of the cylinder is 1.3 tons. Because the pressure of the cylinder limit is only 7Mpa, if the oil pressure of the input system exceeds 7Mpa, the cylinder can not withstand the pressure burst, and it is damaged.