This article mainly introduces:

Pakistan hydraulic cylinder,self-locking hydraulic cylinder manufacturer,self-locking hydraulic cylinder

(Pakistan self-locking hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）

self-locking hydraulic cylinder are widely used in Pakistan，because of long service life，smooth movement，high work efficiency.So our company has designed self-locking hydraulic cylinder for customers from Pakistan.

Introduction to self-locking hydraulic cylinder:

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular self-locking hydraulic cylinder action. Troubleshooting method: Replace the rubber hose.

When the oil pressure of the self-locking hydraulic cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

Protection of the self-locking hydraulic cylinder surface: During the dismantling process, safety protection should be carried out on the self-locking hydraulic cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the self-locking hydraulic cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the self-locking hydraulic cylinder should be cleaned up in time.

self-locking hydraulic cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards self-locking hydraulic cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the self-locking hydraulic cylinder guide is determined by the length of the stroke. Check the strength of self-locking hydraulic cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

Answers to some questions about self-locking hydraulic cylinder:

What is the cylinder with rod cavity, what is the rodless cavity.
The rod cavity is the end of the piston rod, the rodless cavity is the end without the piston rod.

What is hydraulic cylinder guide?
The cylinder itself can not move, the piston moves, the guide should be used to guide the mechanism connected with the piston extension end. For example, in the commonly used hydraulic press, the guide column above is used to guide the pressure plate connected with the piston.