This article mainly introduces:

Egypt hydraulic cylinder,forklift steering cylinder manufacturer,forklift steering cylinder

(Egypt forklift steering cylinder,produced by Hebei Hengyu company）

forklift steering cylinder are widely used in Egypt，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed forklift steering cylinder for customers from Egypt.

Introduction to forklift steering cylinder:

Most of the failure of the forklift steering cylinder is because there is a foreign body in the forklift steering cylinder into the failure of the forklift steering cylinder, the most problematic is that it is difficult to determine when the foreign body is into the forklift steering cylinder. After a foreign body enters, if the outer side of the sliding surface of the piston is equipped with a seal with a lip edge, then the lip edge of the seal can scrape the foreign body when working, which is beneficial to avoid scratching. However, the piston equipped with 0-shaped sealing ring has a sliding surface at both ends, and foreign bodies are sandwiched between this sliding surface, which is easy to form scars.

The internal leakage of the forklift steering cylinder is an important indicator to measure the quality of the forklift steering cylinder: the internal leakage of the forklift steering cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the forklift steering cylinder, so that the forklift steering cylinder can not accurately and stably stop in a certain position of the forklift steering cylinder, so it is one of the main indicators of the forklift steering cylinder.

If the forklift steering cylinder piston rod is found to be worn, it can be brushed and plated first, then ground, and finally adjust the mating accuracy of the piston rod and the guide sleeve. At this time, the guide sleeve can be properly redrilled or the guide sleeve can be re-turned. When making the above repairs, remember to replace various rubber seals in time.

The advantages and disadvantages of the forklift steering cylinder: the surface of the forklift steering cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the forklift steering cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about forklift steering cylinder:

What brand of hydraulic cylinder seal ring is best?
Depending on the specific product, the world famous seal brands are NOK, CFW, PARKER, TSS, WKF, DINGZING DZ, ASTON, HALLITE, TECNOLAN and so on.

What are the reasons why the hydraulic cylinder action is slower than normal?
There are many factors that cause this problem. First, measure the pressure of the main system to see whether the pressure of the main system under the pressure state is consistent with the initial setting. Before measuring the pressure, it is best to check the hydraulic oil and suction oil filter and replace or clean it. Second, check the main relief valve of the reversing control multiway valve to see if there is damage or foreign matter blocking, and clean it. If your pump is a gear pump, the problem should generally be small. Second, look at traffic. There is no leakage in the cylinder, leakage in the reversing valve spool and so on.