This article mainly introduces:

Kuwait hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

(Kuwait stroke adjustable cylinder,produced by Hebei Hengyu company）

stroke adjustable cylinder are widely used in Kuwait，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed stroke adjustable cylinder for customers from Kuwait.

Introduction to stroke adjustable cylinder:

The body of the stroke adjustable cylinder on the processing process requirements: the body of the stroke adjustable cylinder is an important and essential part of the stroke adjustable cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the stroke adjustable cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

When installing the piston rod, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the stroke adjustable cylinder head adn the earring (or the middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent the phenomenon of rigid interference and causing unnecessary damage.

When the stroke adjustable cylinder is in use, ensure that the stroke adjustable cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.

stroke adjustable cylinder seal leakage causes and countermeasures: a. Loose tie rod nut will cause leakage, tighten the tie rod nut according to the torque requirements of tie rod nut, test no leakage can continue to use. b. Pressure exceeding the limit will also cause leakage. Replace the stroke adjustable cylinder seal and re-tighten the tie rod nut to reduce the pressure to the nominal pressure range of the stroke adjustable cylinder. c. The stroke adjustable cylinder seal is extruded, if the O-ring is obviously extruded at the stroke adjustable cylinder seal, replace the stroke adjustable cylinder seal.

Answers to some questions about stroke adjustable cylinder:

What material should be selected to seal the cylinder?
The choice of material for sealing is related to the working environment, strength, and medium of your equipment.

Do the collecting cylinder, distributing cylinder and distributing cylinder on the organic heat carrier boiler need to be notified separately as the pressure vessel for construction?
Do not need to be installed as a separate pressure vessel to inform, according to the organic heat carrier boiler can be informed. Write a "special equipment installation, renovation and maintenance notice" issued on it.