This article mainly introduces:

Indonesia hydraulic cylinder,hydraulic forklift cylinder manufacturer,hydraulic forklift cylinder

(Indonesia hydraulic forklift cylinder,produced by Hebei Hengyu company）

hydraulic forklift cylinder are widely used in Indonesia，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed hydraulic forklift cylinder for customers from Indonesia.

Introduction to hydraulic forklift cylinder:

hydraulic forklift cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards hydraulic forklift cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the hydraulic forklift cylinder guide is determined by the length of the stroke. Check the strength of hydraulic forklift cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

The hydraulic forklift cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

When installing the hydraulic forklift cylinder pipe, the pipe should be cleaned after installation, and should not pass through the hydraulic forklift cylinder block, and the by-pass pipe must be installed in front of the oil port of the hydraulic forklift cylinder block. This is important. Otherwise, the foreign body in the pipeline will enter the hydraulic forklift cylinder, and once it enters, it is difficult to exclude it, but it becomes a foreign body transported to the hydraulic forklift cylinder. Moreover, when cleaning, the removal method of foreign bodies entered in the installation pipeline operation should be considered. In addition, the corrosion in the pipe should be pickling and other procedures before the pipe installation, and the rust must be completely removed.

When purchasing the hydraulic forklift cylinder, try to clarify the following parameters of the hydraulic forklift cylinder: A. hydraulic forklift cylinder diameter, rod diameter, stroke; B. Working pressure or hydraulic forklift cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right hydraulic forklift cylinder type can be found accurately and quickly.

Answers to some questions about hydraulic forklift cylinder:

What is the HS code of the hydraulic cylinder?
HS code of hydraulic cylinder; 8412210000 8412210000 Linear hydraulic power unit (hydraulic cylinder) 0.12000 0.35000 0.00000 0.17000 0.00000

What factors does the movement speed of the cylinder in the hydraulic system depend on?
The hydraulic system should be the piston movement in the cylinder, and the speed should also be the speed of the piston, according to the piston speed formula: v=4qm/pai*(D^2-d^2) where q is the flow rate of the input hydraulic cylinder, m is the volumetric efficiency of the hydraulic cylinder, D, d is the diameter of the piston and piston rod, because other factors are determined, the movement speed of the cylinder depends on the flow rate.