This article mainly introduces:

Australia hydraulic cylinder,large tonnage cylinder manufacturer,large tonnage cylinder

(Australia large tonnage cylinder,produced by Hengyu Group）

large tonnage cylinder are widely used in Australia，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed large tonnage cylinder for customers from Australia.

Introduction to large tonnage cylinder:

large tonnage cylinder piston rod material introduction: In general, we use 45 steel to produce large tonnage cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

The difference between the integral large tonnage cylinder and the split large tonnage cylinder: The integral large tonnage cylinder and the split large tonnage cylinder in the large tonnage cylinder are two different large tonnage cylinders, and they are very different. The whole large tonnage cylinder, which is cast in one body, is not prone to problems such as oil leakage; The split large tonnage cylinder is welded twice, so if it is not handled well at the welding, it is prone to problems such as oil leakage and large tonnage cylinder damage. Therefore, it is obvious that the answer to this question is for difference.

If the large tonnage cylinder piston rod is found to be worn, it can be brushed and plated first, then ground, and finally adjust the mating accuracy of the piston rod and the guide sleeve. At this time, the guide sleeve can be properly redrilled or the guide sleeve can be re-turned. When making the above repairs, remember to replace various rubber seals in time.

When using the large tonnage cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the large tonnage cylinder block. If the large tonnage cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the large tonnage cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the large tonnage cylinder, so that the working efficiency of the large tonnage cylinder is reduced.

Answers to some questions about large tonnage cylinder:

Does the excavator use a hydraulic cylinder?
First, construction machinery is generally a hydraulic cylinder. Second, hydraulic transmission equipment is usually composed of four components, power, execution, control and auxiliary. And the hydraulic cylinder as a linear reciprocating motion or less than 360. Reciprocating motion of the hydraulic mechanism, simple structure, reliable work, is also widely used in the hydraulic system of the main actuator, it is the prime mover in the form of mechanical energy to drive the hydraulic pump produced by the liquid pressure energy, and then can be directly driven load for reciprocating movement or less than 360.

Does the abbreviation bc stand for bucket cylinder or boom cylinder?
Hydraulic excavator hydraulic cylinder includes boom cylinder, bucket rod cylinder and bucket cylinder three parts, four cylinders. Because of the different naming conventions of major manufacturers, the meaning of BC is also different, for the sake of insurance, you need to consult the manufacturer.